FTTH Fiber Access Terminal closure – IFATC-16C

Overview: Integrated FTTx terminal box for 16 users, supporting splicing, splitting and distribution.

Structure & Material: PC+ABS material, IP65/IP66 rated, easy for maintenance.

Optical Performance: Ultra low loss, high return loss for stable transmission.

Configuration: Supports 1×16 / 2×1×8 splitters, up to 24-core splicing.

Environment & Safety: Wide temperature tolerance, lightning-proof and high insulation.

Installation: Wall/pole mountable, suitable for indoor and outdoor use.

Application: Suitable for FTTH, ODN, LAN and optical communication systems.

Inquire Download

Product Description
Specification
Product Advantage

Product Description

1. Product Overview

This fiber access terminal box serves as a cable termination unit to connect feeder cables and drop cables in FTTx optical communication networks. It integrates fiber splicing, optical splitting and cable distribution functions, providing reliable physical protection and standardized fiber management for FTTH network deployment, supporting 16 independent subscriber access ports.

2. Core Features

1. Fully enclosed integrated cabinet structure.

2. Cabinet housing made of PC+ABS composite material, with moisture-proof, waterproof, dust-proof and anti-aging properties; protection rating reaches IP65/IP66.

3. All-in-one design with integrated fixtures for feeder cable clamping, drop cable fixation, fiber splicing storage and fiber routing distribution.

4. Independent routing channels for main cables, fiber pigtails and patch cords to avoid mutual interference; compatible with miniature plug-in PLC splitters for easy field maintenance.

5. Flip-up distribution panel design; feeder cables can be routed through reserved cable ports for convenient installation and post-maintenance.

6. Dual installation modes: wall-mounted and pole-mounted, applicable to both indoor and outdoor deployment environments.

Specification

3. Main Technical Parameters

Item	Technical Index
Access Capacity	16 SC user ports, maximum 24 fiber splicing cores
Protection Grade	IP65, indoor & outdoor dual-use
Cabinet Material	PC+ABS composite / ABS
Flame Retardant Property	Non-flame retardant
Overall Dimension (L×W×D)	340×210×95 mm
Supported Splitter	2 pieces plug-in 1×8 PLC splitters or 1 piece plug-in 1×16 PLC splitter (SC/APC interface)
Input Cable Specification	1 mid-span cable port (Φ14.5 mm); 2 cable gland ports (Φ7–12 mm)
Output Drop Cable Specification	16 ports for 2×3 mm flat drop cable or round cable below Φ4.5 mm
Installation Mode	Wall-mounted / Pole-mounted
Optical Insertion Loss	≤0.2 dB (test wavelength: 1310 nm & 1550 nm)
UPC Return Loss	≥50 dB
APC Return Loss	≥60 dB
Optional Cabinet Colors	Black, grey, white and other customized colors

4. Environmental Adaptability Requirements

• Operating Temperature Range: -40 ℃ ~ +85 ℃

• Relative Humidity: ≤85% (at ambient temperature +30 ℃)

• Atmospheric Pressure: 70 kPa ~ 106 kPa

5. Lightning Protection & Insulation Performance

1. Insulation resistance between grounding device and cabinet metal components: ≥2×10⁴ MΩ (tested under DC 500 V)

2. Withstand voltage between grounding device and cabinet metal parts: ≥3000 V DC, withstand for 1 minute without breakdown or flashover phenomenon

6. Internal Structure Configuration

Type A Configuration

• Accommodates 2×1×8 or 1×1×16 SC/APC miniature PLC splitters

• 1 fusion splicing tray, maximum splicing capacity: 16 fiber cores

Type B Configuration

• Accommodates 2×1×8 or 1×1×16 SC/APC LGX standard module PLC splitters

• 1 fusion splicing tray, maximum splicing capacity: 16 fiber cores

7. Standard & Optional Accessories

Standard Accessories

Splice cassette, fiber routing management tool, installation bolts & nuts, fiber heat shrink protection sleeves, cable hose clamps, cable protection tubes, wire retaining rings, cabinet cover support fasteners, cable inlet rubber sealing gaskets.

Optional Accessory

Pole mounting fixing ring

8. Installation Instructions

8.1 Wall-mounted Installation

1. Drill 4 fixing holes on the wall according to cabinet dimension layout.

2. Embed Φ7.5×40 expansion bolts into wall holes.

3. Align cabinet mounting holes with expansion bolts and fasten with matching nuts.

8.2 Pole-mounted Installation

1. Fix a set of pole mounting rings on the communication utility pole.

2. Secure the cabinet to the pole ring with standard fasteners to complete installation.

9. Application Scope

• Public optical telecommunication access networks

• Local Area Network (LAN) optical fiber transmission systems

• Optical fiber broadband access ODN networks

• FTTH passive optical access network deployment

10. Optical Performance Standard Compliance

All optical indexes meet universal FTTX passive component industry standards, supporting long-term stable transmission of PON upstream and downstream optical signals. Cabinet structure ensures no excessive bending loss during fiber routing and storage.

Product Advantage

1

Integrated Multi-function Design: All-in-one design for splicing, splitting and distribution, supporting 16-user access.
2

Durable Housing: PC+ABS material with IP65/IP66 rating, waterproof, dustproof and anti-aging.
3

Premium Optical Performance: Low insertion loss and high return loss ensure stable signal transmission.
4

Strong Compatibility: Compatible with 1×16 / 1×8 splitters and 24-core fiber splicing.
5

Great Environmental Resistance: Wide temperature adaptability with lightning and insulation protection.
6

Versatile Installation: Supports wall and pole mounting for indoor and outdoor use.