2. Construction and Materials
2.1 Conductor
• Material: Solid Bare Copper
• Size: 24AWG/ 0.0193" / 0.49±0.005mm
2.2 Pairs
4 Pairs
2.3 Insulation
• Thickness: 0.91±0.05 mm HDPE
• Material: HDPE
• Colors: Blue-White/Blue, Orange-White/Orange, Green-White/Green, Brown-White/Brown
2.4 Spline/Cross Separator
FEP or LSZH CROSSWEB
2.5 Rip Cord
Kevlar
2.6 Outer Jacket
• Material: Plenum PE
• Wall Thickness: 0.0157" Nom(0.4mm)
• Outer Diameter (OD): 5.1±0.2mm
3. Standards Compliance
UL 444 & CSA C22.2 No.214 Communications Cables
4. Application Support
• 1000BASE-T, 1000BASE-TX, 100BASE-T, 100BASE-TX, 100VG-AnyLAN, ATM
• VoIP, ISDN, Token, 100MTPPDM, Analog and Data video, POE Type1,2,3,4
5. Electrical Characteristics
Parameter | Value |
Impedance | 1–100MHz: 100±15 Ohms |
Insulation Resistance | ＞5000MΩ*KM |
Dielectric Strength | DC 2500V · 2S |
Max. Conductor DC Resistance (20℃) | 9.5 Ohms/100m |
Resistance Unbalance (%) | Max. 2.5 |
Pair-to-Ground Capacitance Unbalance | 330 pF/100m |
Transfer Impedance | Max 10 mOhms/m @100MHz |
Installation Temp. | -30 to +50℃ |
Operation Temp. | -20 to +75℃ |
6. Transmission Performance (100m, 20±2℃)
Frequency (MHz) | RL (Min.) dB | Insertion Loss (Max.) dB/100m | Propagation Delay (Max.) ns/100m | Delay Skew (Max.) ns/100m | NEXT (Min.) dB | PSNEXT (Min.) dB | ELNEXT (Min.) dB/100m | PSELNEXT (Min.) dB/100m |
1 | 20 | 2.2 | 570 | 45 | 65 | 62 | 61 | 61 |
4 | 23 | 4.2 | 552 | 45 | 56 | 53 | 48 | 48 |
10 | 25 | 6.5 | 545 | 45 | 50 | 47 | 41 | 41 |
16 | 25 | 8.4 | 543 | 45 | 47 | 44 | 36 | 36 |
20 | 25 | 9.3 | 542 | 45 | 45 | 42 | 34 | 34 |
31.25 | 23.6 | 11.6 | 540 | 45 | 42 | 39 | 31 | 31 |
62.5 | 21.5 | 17 | 539 | 45 | 38 | 35 | 25 | 25 |
100 | 20.1 | 22 | 538 | 45 | 35 | 32 | 21 | 21 |
7. Physical Properties
Parameter | Specification |
Pulling Tension (Max) | 25 lbs(110N) |
Bend Radius (Min) | 4 Times the cable diameter |
Operating Temperature | -20 to 75 ℃ （ -4 to 167 ℉） |
8. Application
Meets or exceeds requirements of ANSI/TIA-568-C.2 Category 5e and ISO 11801 (2nd Edition) Class D channel standards.
Meets or exceeds requirements of ANSI/TIA-568-C.2 and IEC 61156-5 Category 5e component standards.
Third party tested to Category 5e channel compliance.
Meets requirements of IEEE 802.3af and IEEE 802.3at for PoE applications.
Descending length cable markings for easier installation management (reduces scrap).
Additional cable colors available.
Home
