Aerial Fiber Access Terminal Closure 96cores

Function: Outdoor aerial fiber closure for fiber splicing, splitting and distribution.

Structure: Compact three-layer structure with 180° flip plate for easy installation and maintenance.

Capacity: Supports up to 96-core fusion and two 1×8 PLC splitters.

Protection: IP65 rated, waterproof, UV and impact resistant for outdoor environments.

Performance: Low insertion loss, stable optical and wide temperature performance.

Advantage: Reusable seal and pass-through cable design for flexible field wiring.

Inquire Download

Product Description
Specification
Product Advantage

Product Description

1. Product Overview

This integrated fiber splice & distribution closure combines cable splitting and fiber routing functions, supporting direct optical cable fusion and branch wiring for optical communication network connections.
It realizes optical signal distribution via adapters and patch cords, and provides protective connection for optical cables and pigtails.
The three-layer internal structure can work as either a fiber splitter box or a fiber splice box. The built-in flip plate supports a rotation angle of ≥180°, greatly simplifying field installation and maintenance. The flip plate is detachable; after removal, the unit can be used purely as a cable splice closure to satisfy diverse engineering deployment demands.

2. Core Product Features

1. Housing constructed from high-strength impact-resistant engineering plastic, with reusable sealed opening structure.

2. Internal space compatible with two pieces of 1×8 PLC splitters (LGX module type or steel tube type).

3. Outdoor performance: UV-resistant, impact-resistant, fully waterproof.

4. Large-angle flip plate (rotatable ≥180°) clearly separates fusion zone and distribution zone, effectively avoiding cable crossing and messy routing.

5. Through-type cable inlet/outlet design, no need to cut the main optical cable during wiring.

Specification

3. Overall Mechanical & Capacity Specifications

Item	Parameter
Overall Dimension	285mm × 175mm × 90mm
Applicable Cable Outer Diameter	Φ7mm ~ Φ18mm
Cable Entry Ports	2 ports for 8–20mm round cables; 4 ports for 5–16mm round cables
Maximum Splice Tray Quantity	4 pieces
Maximum Fusion Splicing Capacity	96 fiber cores
Max. Supported Split Ratio	Not limited by fixed internal structure
Max. Adapter Mounting Quantity	Not limited by fixed internal structure

4. Technical Performance Parameters

Performance Index	Technical Requirement
Minimum Fiber Bending Radius	≥40 mm
Additional Insertion Loss of Splice Tray	≤0.1 dB
Operating Ambient Temperature Range	-40°C ~ +60°C
Lateral Pressure Resistance	≥2000 N per 10 cm length
Impact Resistance Energy	≥20 N·m
Ingress Protection Rating	IP65

5. Standard Installation Procedure

1. Cable Pre-treatment
Strip off cable outer sheath, inner sheath and loose tubes, and clear internal cable filling compound. Reserve 1–1.6 m loose fiber length and 30–50 mm steel strength member. Thread the feeder cable through the cable port, fasten and lock with cable hoops, then fix the cable strength member to secure fiber cores. Coil excess optical cable at the bottom storage area, then route fibers into splice trays for fusion work.

2. Fiber Fusion Protection
Place the fused fiber end into heat shrink tubing within the fusion slot, apply uniform heating to integrate fiber and protective tube. Clip the protected fiber assembly into internal wiring grooves, then install PVC anti-drop covers to prevent fiber displacement.

Product Advantage

1

Integrated Design: All-in-one unit for fiber splicing, splitting and distribution.
2

Easy Operation: 180° rotatable flip plate for simple installation and maintenance.
3

High Capacity: Supports 96-core splicing and dual 1×8 PLC splitters.
4

Outdoor Reliability: IP65 rating with waterproof, UV and impact resistance.
5

Stable Performance: Low signal loss and wide temperature adaptability.
6

Flexible Wiring: Reusable seal and pass-through design for fast field deployment.